-UNIVERSAL FIT KITS
-WEBER FIT KITS
-LARGE ANIMAL KITS
OPEN FIRE KITS
-LIGHT DUTY FORKS
-MEDIUM DUTY FORKS
-HEAVY DUTY FORKS
-5/16" SQUARE SPITS
-1/2" HEXAGON SPITS
-5/8" HEXAGON SPITS
-3/4" HEXAGON SPITS
-1" HEXAGON SPITS
-WEBER FIT SPITS
-WEBER FIT BRACKETS
HAVE A QUESTION?
SEND US AN EMAIL!
(Your shopping cart is empty)
Large Animal Rotisserie Motors
OneGrill™ Stainless Steel Heavy Duty Electric Rotisserie Motor
Reg. Price: $229.99
Usually Ships in 1-3 Business Days
FAQS & FACTS
The OneGrill Professional Quality Heavy Duty Rotisserie Motor has been designed to last a lifetime. Featuring a weather resistant 304 stainless steel housing, heavy duty anti-backlash gear train, and internal cooling fan this motor is recommended for heavy duty applications up to 85 lbs. Loads up to 100 Lbs are possible but must be perfectly balanced; imbalanced applications such as pig or lamb should not exceed 75 lbs. With the ability to fit industry standard 3'' motor mounting brackets this motor can be used for a variety of applications for loads large or small. Additional features include: Side mounted on/off switch and needle bearing gearbox. 110 volt. 2 rpm. Motor manufactured and assembled in U.S.A.
Fitment: 5/16" square drive
Plug Type: US
Load Limit: 85 lbs. *See Extended Information
Weight: 5.5 lbs.
Mount Size: 3"
Dimensions: 5 1/2" deep by 4" wide by 6" high
Rotation: Counter Clockwise
The motor rating determines the amount of load that can be supported by the gear assembly. On a 100 pound load motor, that would be 50 pounds by the motor and 50 pounds by the support. It is always best to support your spit rod on both sides when possible, taking the weight off the motor.
The amount of food, baskets and other items including the spit, should total about 50% of the stated motor load, but can be as little as 20% or as much as 100%. This allows for other factors such as extreme temperatures or out of balance conditions.
The common shaded pole rotisserie motor is not a high torque type of motor. They are built for higher speeds and are very inexpensive to produce. They have no torque to speak of and, without a gear box can be stalled with your fingers. They are typically used in fans for example. By converting that speed through a high reduction gear train, the torque is magnified many thousand times.
How much food can you actually put on?
It is all about balance. If the food was perfectly balanced on the rod so that there was no "Heavy Side", then you could put 100 pounds or even more if the rod would hold it. This is almost never the case. The food will always be out of balance to some degree. If it is out a lot, then you may only be able to have as little as 20 pounds on the spit. If it is balanced fairly well then you can expect to do about 50 pounds or so.
The most important thing to consider is the balance of the spit. If the spit is not properly balanced then the motor will have excessive intermittent loads applied to the gear train and that will reduce the life of the unit. These motors are an exceptional value for rotisserie cooking; however they are not industrial gear head motors. It is imperative that you balance your spit before using. A few extra minutes spent on this operation will make a huge difference in the life of your unit. A perfectly balanced heavy spit can be turned with your fingers easily. An out of balance spit, of the same weight may need a wrench. You should load your spit and test the spinning in your hands. If you can spin it easily and you have good balance, it is ready to grill.
The counterbalance weight is to make up for a minor out of balance condition. The easiest way to set it is to let the heavy side get to the bottom of the rotation. This is easy to see and hear, and is a natural condition for the load to want to be in. Turn off the motor. Then have your counterbalance weight pointing straight up. This will be exactly opposite the heaviest side.
304 Stainless steel water resistant case
Anti-Backlash Gear Train
High torque design
Internal cooling fan for high heat, long use applications
Heavy duty needle bearing gear box
Side mounted On/Off switch
Motor spins clockwise when looking at the input.
Recommended for loads of 85 lbs*. or less (balance dependent).
*For imbalanced animals such as pig or lamb we strongly recommend a load limit of 75 lbs. unless additional counterbalancing is used.
1 year OneGrill™ "No Hassle" Warranty
Product Code: 4pm08
ACCESSORIES FOR THIS PRODUCT: Check the box for the desired accessories and click the "Add to Cart" button above.
OneGrill™ Matte Black Cordless Battery Operated Grill Rotisserie Motor w/ AC Adapter
OneGrill™ Stainless Steel Electric Grill Rotisserie Motor
OneGrill™ Matte Black Cordless Battery Operated Grill Rotisserie Motor
OneGrill™ Chrome Cordless Battery Operated Grill Rotisserie Motor
Browse for more products in the same category as this item:
Large Animal Rotisserie Motors
Electric Grill Rotisserie Motors
Heavy Duty Grill Rotisserie Motors
Send Us Feedback
Copyright 2013 OneGrill, LLC. All Rights Reserved.